034-401-1000 – 034Motorsport Density Line Adjustable Upper Control Arm Kit, Audi B5/B6/B7/C5 A4/S4/RS4 & A6/S6/RS6

034 Motorsport Density Line Adjustable Upper Control Arm Kit, Audi B5/B6/B7/C5 A4/S4/RS4/A6/S6/RS6

034Motorsport is proud to offer our fully adjustable upper control arms for the B5/B6/B7 and C5 chassis cars! These arms are perfect for those who have lowered their car from factory ride height and as a result have excessive camber, which causes accelerated tire wear on the street.

Features:

• CNC Machined Billet 6061 Construction, Black Anodised Finish
• 034Motorsport Density Line Inner Bushings
• Aurora Spherical Bearings Featuring Teflon Race Lining
• Built in Safety Washer – Eliminates any chance of the spherical ever separating.
• Arm sets ship set to stock length.
• Over 5/8″ of outward adjustability, and adjustable in 1/36″ increments. Each 1/36″ adjustment is approximately .1 degree, allowing for highly accurate adjustments.
• Rod end design eliminates tightening creep which is inherent with turnbuckle-style arms.
• Adjustments can be easily made by threading out an M6 head allen bolt. The pinch pin stays installed in the upright. A jam nut keeps everything tight once adjusted.
• Dust boots are now included with all adjustable upper control arms. We ship the boots uninstalled; once you have the alignment set, install the dust boots before final installation.

Arms ship with everything pictured and assembled, price for one kit for one front suspension.

Please Note: Do not run the heims with fewer than 8 threads in the control arm itself. Using fewer threads than this can cause failure of the part and 034Motorsport will not be responsible for installation errors. If your alignment requires that you must have less than 8 threads engaged then contact us, but do not drive the car with less than 8 threads engaged! Tighten M10 pan head allen bolt to 45 ft/lbs with blue loctite.

Control arms do not have to be removed to adjust camber. Please see the video below highlighting the ease of adjustment.

Installation Instructions for Dust Boots:

Click here

034Motorsport Density Line & Spherical Lower Control Arms are available as an option.